Mellanox Technologies MSX1024B-1BRS Przewodnik Instalacji Pobierz pdf (Strona 26)

Connecting to the Switch Platform

Rev 1.0

Mellanox Technologies

3 Connecting to the Switch Platform

3.1 Starting an SSH Connection to the Switch (CLI)

Step 1. Set up an Ethernet connection between the switch and a local network machine (“the remote

machine” henceforth) using a standard RJ-45 connector.

Step 2. Connect to the remote machine (rem_mach1 is used as an example).

Step 3. Start a remote shell to the switch using the following command using 

<switch_IP_address> is the IP address of the switch.

Step 4. You can enter any supported command now.

3.2 Resetting the Switch

On the connector side panel under the system LEDs is a reset button. This reset button requires a

tool to be pressed.

rem_mach1 > ssh -l <username> <switch ip address>

Mellanox MLNX-OS Switch Management

Password:

Last login: Thu Apr 28 11:24:13 2011 from 192.168.10.1

Mellanox Switch

sx-43 [standalone: master] >

DO NOT use a sharp pointed object such as needle or push pin for pressing the Reset

button. Sharp objects can cause damage, use a flat object to press this reset button.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Brak uwag

Mellanox Technologies MSX1024B-1BRS Przewodnik Instalacji Strona 26